Airlink EDGE/GPRS - Manual (Page 115)

PinPoint-E EDGE/GPRS - User Guide, version 2.32 109
AT Commands: PinPoint
This group includes commands specific to the PinPoint-E and GPS.
FIGURE 1. PinPoint
DTRI=n
RTSI=n
PinPoint
This screen shot does not show all the commands on the Wireless Ace PinPoint
menu, scroll down in Wireless Ace for the rest of the PinPoint commands. Some
commands detailed here may not be available for your modem model.
Enable monitoring the DTR signal as in input event.
n=0 : Disable DTR input monitoring.
n=1 : Enable DTR input monitoring.
Note: If DTR is used as an input, DTR cannot be used for low-power control.
Enable monitoring the RTS signal as in input event.
n=0 : Disable RTS input monitoring.
n=1 : Enable RST input monitoring.