Airlink EDGE/GPRS User Manual
Page 73
PinPoint-E EDGE/GPRS - User Guide, version 2.32
67
AT Commands
•
Required variable parameters are denoted with italicized text, example,
Dn
. The
n
is variable
and noted in the parameters column.
•
Optional parameters are denoted with square brackets
[ ]
.
•
Most commands with parameters can be entered with
?
to read the current value (for example,
AT&D? will respond with “2” if the default has not been changed).
•
AT Commands are not case sensitive. A capital “E” is the same as a lower-case “e”.
•
When you are using a terminal connection, if you enter a command which is recognized by the
PinPoint-E, it will respond with “OK”. If the command is not recognized, the response will be
“ERROR”.
•
Those commands applicable only to certain model numbers of the PinPoint-E will be noted.
Caution:
Symbols listed with commands, such as
*
,
/
,
&
, or
?
, are part of the com-
mand and must be included. Commands with symbols other than
*
may require
PassThru mode.