Airlink EDGE/GPRS User Manual
Page 130
Advertising
PinPoint-E EDGE/GPRS - User Guide, version 2.32
124
PPPoE: Point to Point Protocol over Ethernet
FIGURE 15.
Connect
a. When the Connect window opens, select Properties.
Optional:
On the General tab, if you gave the modem a name with *MODEMNAME above,
you can type in that name as the Service Name.
FIGURE 16.
Connection Properties
b. Select Networking. Select Settings. Remove the checks from all three PPP settings. Select
OK.
FIGURE 17.
Connection Properties - PPP Settings
Same as *MODEMNAME configured earlier
Advertising