Important – Hale CAFS Attack User Manual

Page 17

Advertising
background image

17

CAFS Air Bottle Installer/Operation Guide
p/n: 029-0020-85-0

De sc rip tio n

Paddle wheel flow sensors.

CAFSAttack operator control panel

Two Class1 “Smart-Switch” Controllers with LED bar graph array.

Inteli-Tank high pressure air tank level indicator - four (4) RED indica-
tors lights, indicates cylinder tank charge remaining.

On/Off CAFSAttack air enable switch, to activate the CAFSAttack
system.

Amber HIGH pressure warning light, illuminates at pressures above
150 PSI (10 BAR).

Quick connect high pressure air cylinder refill connection for an SCBA
Breathing Air High Pressure 4,500 PSI (310 BAR) Compressor Sys-
tem. SCBA station not included.

Main air bottle open/close valve - introduces HIGH pressure air into
the system.

HIGH pressure hose (2) - air bottle cylinders-to-pressure valves.

LOW pressure hose (2) - high pressure air shut-off valves-to-SVS dis-
charge valves.

FoamLogix foam pump, Model 2.1A - standard (not shown)

See separate manual for description, installation and operation of Foam-
Logix Electronic Foam Proportioning System (Hale p/n: 029-0020-74-0).

CAFSAttack Installer / Operation Manual, Hale p/n:209-0020-85-0

Additional options, such as; FoamLogix Models 3.3 or 5.0, for higher foam
solution applications or the use of Class “B” type foams are available to fur-
ther meet customer requirements.

IMPORTANT!

COMPONENTS ARE INSTALLED WHERE REQUIRED, PER CUSTOMER
ORDER AND/OR OPERATIONAL REQUIREMENTS. NOT ALL INSTRUCTIONS
HEREIN ARE INCLUSIVE. THEY ARE GENERAL GUIDELINES ONLY. INDIVID-
UAL CHASSIS CONFIGURATION, BUILDER PRACTICES, ETC. DICTATE
WHEN AND WHERE COMPONENTS ARE INSTALLED.

Using accepted assembly procedures, the CAFSAttack air cylinders may be
mounted on the apparatus in an arrangement that secures the cylinders in
all types of mobile use and where they are least susceptible to accidental
impact.

Once the cylinders are in place, the interconnecting valving, pressure
gauges, pneumatic lines and related components must be installed.

Advertising