BNC 645 User Manual
Model 645 arbitrary waveform generator, User’s manual
Advertising
Table of contents
Document Outline
- 645 User's manual
- Table of Contents
- 1. General Information
- 2. Overview
- 3. Common Operations
- 3.1 Graph Mode
- 3.2 Numerical/Alphabetical Entry
- 3.3 To select Output Function
- 3.4 To set Output Frequency/Period
- 3.5 To set output Amplitude
- 3.6 To set DC Offset Voltage
- 3.7 To set High-Level and Low-Level Bounds
- 3.8 To set Waveform Polarity
- 3.9 To set Output Termination
- 3.10 To Enable/Disable Voltage Autoranging
- 3.11 To Control Output connector
- 3.12 To Enabled/Disable Sync Out Signal
- 3.13 To Restore the Factory Default settings
- 4. Waveform output Operations
- 5. System Operations
- 6. Remote Interface Operations
- 7. Error Messages
- Appendix
- A. Specification List
- B. Remote Interface Reference
- C. General Specifications
- D. Application Programs