BNC 645 - Manual (Page 15)

15
2.2 Factory Default Settings
Table 2-1 shows the factory default settings of Model 645 when it is
powered on the very first time.
Table 2-1 Factory default settings
Parameters marked with a star ( ＊ ) are stored in non-volatile memory.
Output Configuration Default Setting
Function Sine wave
Frequency 1 kHz
Amplitude/Offset 100 mVpp/0.000Vdc
Output Units Vpp
Output Termination 50Ω
Autorange On
Modulation
1 kHz Sine
(AM, FM, PM, FSK)
Carrier
1 kHz Pulse
(PWM)
Mod. Waveform(AM) 100 Hz Sine
Mod. Waveform(PM, FM, PWM) 10 Hz Sine
AM Depth
100%
FM Deviation 100 Hz
PM Deviation 180 degrees
FSK Hop Frequency 100 Hz
FSK Rate 10 Hz
PWM Width Deviation 10 μs
Modulation State Off