BNC 645 - Manual (Page 99)

99
-221 Settings conflict; FM turned off by selection of other mode
or modulation
Only one modulation can be enabled at one time.
-221 Settings conflict; AM turned off by selection of other mode
or modulation
Only one modulation can be enabled at one time.
-221 Settings conflict; PM turned off by selection of other mode
or modulation
Only one modulation can be enabled at one time.
-221 Settings conflict; PWM turned off by selection of other mode
or modulation
Only one modulation can be enabled at one time.
-221 Settings conflict; sweep turned off by selection of other
mode or modulation
Only one modulation can be enabled at one time.
-221 Settings conflict; not able to modulate this function
This waveform generator cannot generate an AM, FM, PM, FSK
modulated waveform using the pulse, noise, or dc voltage function.
-221 Settings conflict; PWM only available in pulse function
The waveform generator can only generate PWM modulated
waveform using pulse function.
-221 Settings conflict; not able to sweep this function
The waveform generator cannot generate a sweep using the pulse,
noise or dc voltage function.
-221 Settings conflict; not able to burst this function
The waveform generator cannot generate a burst using the dc
voltage function.