BNC 645 - Manual (Page 76)

76
3. To recall a saved state, press the Recall State softkey to enter the
recall-state submenu:
a. Press the softkey under your desired location number to
recall the state from that memory location.
b. Press the Recall State softkey to restore from the selected
state in the memory or the Cancel softkey to cancel.
Figure 4-21
4. To delete a saved state, press the Del State softkey to enter the
delete-state submenu:
a. Press the softkey under your desired location number for
deletion.
b. Press the Delete State softkey to delete the selected state
or the Cancel softkey to cancel.
Figure 4-22
5. To set the power-on state (i.e., the instrument state restored
when the waveform generator is powered on), press the Power On
softkey to enter the power-on-state submenu:
a. Press the softkey under your desired location number or the
softkey under State Def (factory default).
b. Make sure your selection is present under the Power On
softkey.
Figure 4-23