BNC 645 - Manual (Page 95)

95
Use this command to read one error from the error queue:
SYSTem:ERRor?
Use this command to clear all the errors in the error queue:
*CLS
7.1 Command Errors
-101 Invalid character
An invalid character was detected in the command string.
-102 Syntax error
Invalid syntax was detected in the command string.
-103 Invalid separator
An invalid separator was detected in the command string.
-105 GET not allowed
GET is not allowed in a command string.
-108 Parameter not allowed
More parameters than expected were received.
-109 Missing parameter
Fewer parameters than expected were received.
-112 Program mnemonic too long
More characters than allowed in the command header were received.
-113 Undefined header
An invalid command was received.
-123 Exponent too large
A numeric parameter with exponent larger than 32,759 was
detected.
-124 Too many digits