ElmoMC AC Input Digital Servo Drives-Tuba - Manual (Page 42)

Tuba Installation Guide Installation
MAN-TUBIG (Ver. 1.502)
www.elmomc.com
42
FEEDBACK B, on the front of the Tuba, has a 15-pin D-Sub plug. Connect the Auxiliary Feedback
cable, from the controller or other device, to FEEDBACK B using a 15-pin D-Sub socket with a
metal housing. When assembling the Auxiliary Feedback cable, follow the instructions in
Section 3.4.4 (Feedback and Control Cable Assemblies).
Tuba
Tuba
Tuba
Tuba
Figure 24: Main Encoder Buffered Output or Emulated Encoder Output on FEEDBACK B -
Connection Diagram