ETC Sensor3 CE (ESR3) Rack - Manual (Page 36)

28 Sensor3 CE Rack (ESR3) Installation Manual
Sensor3 Installation Checklist
A checklist is provided in Appendix B: Sensor3 Installation Checklist, page 35 . Following
this checklist will help ensure that your Sensor3 system operates reliably and without
problems. The checklist is a summary version of the steps in this chapter.
Sealing Rack Air Leaks
After you have installed all conduit, trunking and cables to the rack and connected all wiring,
you must seal any air leaks in the rack cabinet created during the installation process. Use
urethane aerosol foam to fill air gaps.
Step 1: Seal all access holes.
Step 2: Re-install access panels removed during installation, or completely cover their
openings with fiche paper and urethane aerosol foam or duct seal.
Step 3: Seal any air gaps caused by bent access panels.
Step 4: Fill in any gaps inside partially filled wiring conduit or trunking.
Step 5: Fill in other gaps or holes in the cabinet created during installation.
Attaching the door
All Sensor3 racks are delivered with the doors separated. This improves access to the rack
interior for wiring and other installation work. Some loose door installation parts are bundled
with the doors as detailed below in Table 2.
When interior wiring is completed, attach the rack door. Do not operate your dimmer rack
without a door installed.
Step 1: Insert the top hinge into the slot on the top of the rack and attach it to the frame
C A U T I O N : Air leaks can cause dimmer racks to overheat during operation and shut down.
C A U T I O N : Dimmer rack doors filter and regulate ventilation airflow. Operating without the
door can contaminate the rack interior with dust and cause rack modules to
overheat.
Table 2: Loose parts shipped with ESR3 rack doors
Quantity ETC Part Number Descriptions
1 4100A1012 DMX Cable Prep Kit w/ 1 screw connector
1 4101A2003 Ethernet Term Kit
1
7051A2009(ESR3-48/36/24)
7051A3006(ESR3-12)
Rack Bottom Hinge
1 7051A3006 Door Top Hinge
2 HW253 Screw 6-32x3/8 truss SS
3 HW757 Pin, Taper 5/32x1.0
6 HW327 Washer, Flat #8 .188x.375x.049 SS
1 HW8202 Door Key
1 7051A4116 Beacon Acrylic