Introduction, How to use this guide, Warning and notice conventions – ETC Sensor3 CE (ESR3) Rack User Manual

Page 9

Advertising
background image

Introduction

1

Introduction

Welcome to the installation manual for Sensor

®

3 CE racks. This manual contains the

procedures for safe and efficient installation of Sensor3 rack dimming systems. There are

four sizes of installation racks:

ESR3-12 – Twelve dimmer slots (up to 24 circuits)

ESR3-24 – Twenty-four dimmer slots (up to 48 circuits)

ESR3-36 – Thirty-six dimmer slots (up to 72 circuits)

ESR3-48 – Forty-eight dimmer slots (up to 96 circuits)

How to use this Guide

Use this guide during system installation. It contains complete installation instructions.

Prepare for Installation, page 3

tells you about things you should check before

commencing installation, like space, power and cooling requirements for your Sensor3
installation.

Installation of Racks, page 5

tells you how to mechanically install the racks and connect

the feeder cables.

Land Load Wires, page 13

tells you how to connect the outgoing wiring to your loads.

Control and Data Connections, page 19

tells you how to connect DMX, Ethernet and

other data wiring to your rack.

Finishing Installation, page 27

tells you how to finish the installation of your rack. Note

that the operations in this chapter should be performed by ETC trained technicians.

When viewing this document in electronic form (.pdf file) with Adobe Acrobat Reader, blue

italicised text followed by a page number such as

How to use this Guide, page 1

is a link

within the document. If you click on the link, it will jump to that section or topic.

Warning and Notice Conventions

These symbols are used in the Sensor3 documentation to alert you to danger or important

information.

N o t e :

Notes are helpful hints and information that is supplemental to the main text.

C A U T I O N :

A Caution statement indicates situations where there may be undefined or

unwanted consequences of an action, potential for data loss or an equipment

problem.

W A R N I N G :

A Warning statement indicates situations where damage may occur, people

may be harmed, or there are serious or dangerous consequences of an

action.

W A R N I N G :

RISK OF ELECTRIC SHOCK! This warning statement indicates situations

where there is a risk of electric shock.

Advertising