Lenze E94AxHE Technology Application Table positioning - Manual (Page 15)

EDS94TA10050xxxx EN 1.2 - 03/2010
L
15
9400 Technology applications | Table positioning
Parameter setting & configuration
Basic settings
5.3 Basic settings
5.3.1 Machine parameters

Tip!
In the »Engineer« the most important machine parameters can be directly adapted
to the machine on the Application parameters tab in the topmost Overview dialog
level.
Short overview of machine parameters
The machine parameters describe e.g. the motor end of the mechanics
used.
The setting of the machine parameters in the »Engineer» is carried out on
the Application parameters tab in the dialog level Overview  Machine
parameters.
Parameter Lenze setting
Value Unit
C00173 Mains voltage 400/415 V
C00174 Undervoltage (LU) threshold 285 V
C00600 Resp. to DC bus overvoltage Trouble
C02520 Gearbox factor numerator: Motor 1
C02521 Gearbox factor denom: Motor 1
C02527 Motor mounting direction Motor rotating CW
C02570 Position control structure Phase control
C02522 Gearbox factor num.: Pos. enc. 1
C02523 Gearbox factor denom.: Pos. enc. 1
C02529 Mounting direction of position encoder Encoder rotating CW
Description of the mechanics (load, tool)
C02528
Traversing range Limited
C02524 Feed constant 360.0000 unit
C02525 Unit °
C02526 User-defined unit °
C02533 Time unit s
C00273/1 Motor moment of inertia Motor-dependent kg cm 2
C00273/2 Load moment of inertia 0.00 kg cm 2
M