Rockwell Automation 20D PowerFlex 700S Drive Ph I Control, Frames 1...11 - Manual (Page 211)

Appendix
C
Application Notes
For additional application notes, refer to the PowerFlex 700S Adjustable
Frequency AC Drive with Phase I Control - Reference Manual, publication
PFLEX-RM002.
Input Voltage Range/
Tolerance
For Information on … See Page...
Input Voltage Range/Tolerance C-1
Motor Control Mode C-2
Motor Overload C-3
Overspeed Limit C-4
Stop Dwell Time C-5
Setpt 1 Data C-6
Setpt 2 Data C-6
Drive Rating Nominal Line
Voltage Nominal Motor
Voltage Drive Full Power
Range Drive Operating
Range
200-240 200 200† 200-264 180-264
208 208 208-264
240 230 230-264
380-400 380 380† 380-528 342-528
400 400 400-528
480 460 460-528
500-600
(Frames 1-4 Only) 600 575† 575-660 432-660
500-690
(Frames 5 & 6 Only) 600 575† 575-660 475-759
690 690 690-759 475-759
Drive Full Power Range = Nominal Motor Voltage to Drive Rated Voltage + 10%.
Rated current is available across the entire Drive Full Power
Range
Drive Operating Range = Lowest† Nominal Motor Voltage - 10% to Drive Rated Voltage +
10%.
Drive Output is linearly derated when Actual Line Voltage is less
than the Nominal Motor Voltage
HP
@ Motor (Drive Output)
Actual Line Voltage (Drive Input)
Full Power Range
Drive Operating Range
Nominal Motor Voltage -10%
Nominal Motor Voltage
Derated Power Range
No Drive
Output
Drive Rated Voltage
Drive Rated Voltage +10%