Rockwell Automation 20D PowerFlex 700S Drive Ph I Control, Frames 1...11 - Manual (Page 218)

D-2 HIM Overview
LCD Display Elements
ALT Functions To use an ALT function, press the ALT key release it, then press the
programming key associated with one of the following functions:
Table D.A ALT Key Functions
Display Description
Direction Drive Status Alarm Auto/Manual Information
Commanded or Output Frequency
Programming / Monitoring / Troubleshooting
Auto F Stopped
0.0
RPM
Main Menu:
Parameter
Device Select
Diagnostics
0.0
ALT Key and then...
S.M.A.R.T.
Function not available
View
Allows the selection of how parameters will be viewed or
detailed information about a parameter or component.
Lang
Not Functional at this time
Auto/Man
Function not available
Remove
Allows HIM removal without causing a fault if the HIM is
not the last controlling device and does not have Manual
control of the drive.
Exp
Allows the value to be entered as an exponent.
Param #
Allows entry of a parameter number for viewing/editing.
ALT
ALT Esc
ALT Sel
ALT
ALT
ALT
ALT ..
ALT +/–