Chapter 1, Getting started, Components – Rockwell Automation 20-750-BNETIP BACnet/IP Option Module User Manual
Page 11
Advertising
Rockwell Automation Publication 750COM-UM005B-EN-P - June 2014
11
Chapter
1
Getting Started
The 20-750-BNETIP option module is intended for installation into a
PowerFlex 750-Series drive and is used for network communication.
Components
Topic
Page
➊
➋
➌
Item Part
Description
➊
Status Indicators
Three status indicators that
indicate the status of the option
module and network
communication. See
➋
IP Address Selection
Jumper
Sets the source used for the
network address. See
.
➌
Ethernet Connector
RJ45 connector for the Ethernet
network cable.
Advertising