Rockwell Automation 20-750-BNETIP BACnet/IP Option Module - Manual (Page 67)

Rockwell Automation Publication 750COM-UM005B-EN-P - June 2014 67
Option Module Parameters Appendix B
04
05
06
07 [IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
Sets the IP address bytes for the option module’s
network address when the IP Address Selection
Jumper ( Figure 1 on page 18 ) is set on Pins 1 and
2—or the jumper is missing.
Important: To set the IP address using these
parameters, Device Parameter 16 - [DHCP] must
be set to ‘0’ (Disabled).
Default: 192
Default: 168
Default: 0
Default: 1
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
08
09
10
11 [Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
Sets the subnet mask bytes for the option module’s
network address.
Important: To set the subnet mask using these
parameters, Device Parameter 16 - [DHCP] must
be set to ‘0’ (Disabled).
Default: 255
Default: 255
Default: 255
Default: 0
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
12
13
14
15 [Gateway Cfg 1]
[Gateway Cfg 2]
[Gateway Cfg 3]
[Gateway Cfg 4]
Sets the gateway address bytes for the option
module’s network address.
Important: To set the gateway address using
these parameters, Device Parameter 16 - [DHCP]
must be set to ‘0’ (Disabled).
Default: 192
Default: 168
Default: 0
Default: 1
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
Parameter
No. Name and Description
Details
255.255.255.255
[IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
255.255.255.255
[Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
255.255.255.255
[Gateway Cfg 1]
[Gateway Cfg 2]
[Gateway Cfg 3]
[Gateway Cfg 4]