Rockwell Automation 20-750-BNETIP BACnet/IP Option Module - Manual (Page 58)

58 Rockwell Automation Publication 750COM-UM005B-EN-P - June 2014
Chapter 6 Viewing Option Module Web Pages
Figure 10 - DOS Dialog Box Example Showing Email Server IP Address
3. Click Save Changes.
The figure below shows an example email message automatically sent by the
option module in response to selected events.
Figure 11 - Example of Email Message Sent by the Option Module
IMPORTANT After configuring E-mail Notification, we recommend protecting
the settings. Otherwise the configuration can be changed anytime
the web page is accessed with a browser. To protect the settings,
use Device Parameter 27 - [Web Features] to set E-mail Cfg Bit
0 value to ‘0’ (Disabled).
TIP To stop email messages, uncheck all of the ‘Send an e-mail message
when…’ boxes.
Disabling the option module web pages by setting Device Parameter 26
- [Web Enable] to ‘0’ (Disabled) will not stop the option module from
sending email messages.