Rockwell Automation 20-750-BNETIP BACnet/IP Option Module - Manual (Page 40)

40 Rockwell Automation Publication 750COM-UM005B-EN-P - June 2014
Chapter 4 Using BACnet Services and Objects
Supported BACnet Objects
The type of drive used on the network determines the specific BACnet objects
that are supported. See
Table 3 for descriptions of the BACnet objects and the
drives supporting those objects.
Table 3 - BACnet Object Descriptions and Supported Drives
Object Name Use this Object to... Drive
Parameter
Number
PowerFlex 750-
Series Drive
753
755
Analog Input (AI) Objects
AI0 Analog Input 1 (%) Read the value of Analog Input 1 (voltage or current) on the drive’s I/O
terminal block.
260 ✔ —
Analog Output (AO) Objects
AO0 Analog Output 1 (%) Read/write the value of Analog Output on the drive’s I/O terminal block. 276 ✔ —
Analog Value (AV) Objects
AV0 Speed Reference A Read/write the Speed Reference A. — ✔ ✔
AV1 Speed Reference B Read/write the Speed Reference B. — ✔ ✔
AV2 Output Frequency (Hz) Read the drive’s output frequency. 1 ✔ ✔
AV3 Output Current (Amps) Read the drive’s output current. 7 ✔ ✔
AV4 Output Voltage (VAC) Read the drive’s output voltage. 8 ✔ ✔
AV5 Output Power (kW) Read the drive’s output power. 9 ✔ ✔
AV6 Output Energy (kWh) Read/write the drive’s accumulated output energy.
Important: When writing, this object accepts only a value of ‘0’ (zero). 14 ✔ ✔
✔ ✔
AV7 Output Energy 2 (MWh) Read/write the drive’s accumulated Output energy in terms of MWh.
Important: When writing, this object accepts only a value of ‘0’ (zero). 13 ✔ ✔
AV8 DC Bus Voltage (VDC) Read the drive’s DC bus voltage. 11 ✔ ✔
AV9 Drive Temp (°C) Read the drive’s temperature. 944 ✔ ✔
AV10 Reserved — — — —
AV11 Run Time (Hours) Read/write the drive’s accumulated run time.
Important: When writing, this object accepts only a value of ‘0’ (zero). 15 ✔ ✔
✔ ✔
AV12 Fault 1 Read the code for the drive’s most recent fault. DPI Fault
Object
✔ ✔
AV13 Fault 2 Read the code for the drive’s second most recent fault. DPI Fault
Object
✔ ✔
AV14 Fault 3 Read the code for the drive’s third most recent fault. DPI Fault
Object
✔ ✔
AV15 Accel Time 1 (Sec) Read/write the drive’s Accel Time 1 setting. 535 ✔ ✔
AV16 Accel Time 2 (Sec) Read/write the drive’s Accel Time 2 setting. 536 ✔ ✔
AV17 Decel Time 1 (Sec) Read/write the drive’s Decel Time 1 setting. 537 ✔ ✔
AV18 Decel Time 2 (Sec) Read/write the drive’s Decel Time 2 setting. 538 ✔ ✔
AV19 Reference 1 (%) Read/write the Reference 1. 545 ✔ ✔
AV20 Reference 2 (%) Read/write the Reference 2. 550 ✔ ✔