Appendix b, Option module parameters, Parameter types – Rockwell Automation 20-750-BNETIP BACnet/IP Option Module User Manual
Page 65: Option module parameters. f
Rockwell Automation Publication 750COM-UM005B-EN-P - June 2014
65
Appendix
B
Option Module Parameters
This appendix provides information about the option module parameters.
Parameter Types
The option module has two types of parameters:
• Device parameters are used to configure the option module to operate on the
network.
• Host parameters are used to configure the option module’s various fault
actions with the drive.
You can view option module
Device and Host parameters with any of the
following drive configuration tools:
• PowerFlex 20-HIM-A6 or 20-HIM-C6S HIM—use the
or
key to scroll to the drive port in which the module resides, press the
(Folders) key, and use the
or
key to scroll to the DEV
PARAM or HOST PARAM folder.
• Connected Components Workbench software—click the tab for the
option module at the bottom of the window, click the Parameters icon in
the tool bar, and click the
Device or Host Parameters tab.
• DriveExplorer software—find the option module in the treeview and open
its Parameters folder.
• DriveExecutive software—find the option module in the treeview, expand
the module in the tree, and open its Parameters folder.
Topic
Page