Rockwell Automation 160 SER A FRN 1.XX-4.XX - Manual (Page 2)

Please Read!
This manual is intended to guide qualified
personnel in the installation and operation of this
product.
Because of the variety of uses for this equipment
and because of the differences between this
solid-state equipment and electromechanical
equipment, the user of and those responsible for
applying this equipment must satisfy themselves
as to the acceptability of each application and use
of the equipment. In no event will Allen-Bradley
Company be responsible or liable for indirect or
consequential damages resulting from the use or
application of this equipment.
The illustrations shown in this manual are
intended solely to illustrate the text of this
manual. Because of the many variables and
requirements associated with any particular
installation, the Allen-Bradley Company cannot
assume responsibility or liability for actual use
based upon the illustrative uses and applications.
No patent liability is assumed by Allen-Bradley
Company with respect to use of information,
circuits or equipment described in this text.
Reproduction of the content of this manual, in
whole or in part, without written permission of
the Allen-Bradley Company is prohibited.
Important User Information
The information in this manual is organized in
numbered chapters. Read each chapter in
sequence and perform procedures when you are
instructed to do so. Do not proceed to the next
chapter until you have completed all procedures.
Throughout this manual we use notes to make you
aware of safety considerations:
ATTENTION: Identifies information
about practices or circumstances that
can lead to personal injury or death,
property damage or economic loss.
Attentions help you:
D identify a hazard
D avoid the hazard
D recognize the consequences
Important: Identifies information that is
especially important for successful application
and understanding of the product.
SSC is a trademark of Allen-Bradley Company, Inc.