Rockwell Automation 160 SER A FRN 1.XX-4.XX - Manual (Page 42)

Appendix A -Specifications and Accessories
A–2
Table A.3 - Specifications For All Controller Ratings
Input/Output Ratings (All Controller Ratings)
Output Voltage (V) Adjustable from 0V to input voltage
Output Frequency (Hz) 0 to 240 Hertz Programmable
Efficiency (%) 97.5% (Typical)
Transient Protection Standard 2 kV (Optional 6 kV using MOV module). See accessories on page A-5.
Environmental Specifications (All Controller Ratings)
Enclosure IP 20
Ambient Temperature 0_C to 50_C
Storage Temperature Ć40_C to 85_C
Relative Humidity 0 to 95% (non condensing)
Vibration 1.0 G Operational - 2.5 G Non-operational
Shock 15 G Operational - 30 G Non-operational
Altitude 1,000 m (3,300 ft.) without derating
Control Inputs (All Controller Ratings)
Control Input Type For dry contact closure input - the controller has an internal 12V power supply that provides
10-mA (typical) current flow.
Also accepts open collector/solid state input with maximum leakage current of 50 mA
Start, Stop, Forward/Reverse Configurable inputs for 2 or 3 wire control
SW1, SW2, SW3
(Preset Speed Model only) Configurable Inputs for control of 8 preset speeds and 2 Accel/Decel times
Approvals and Standards Compliance (All Controller Ratings)
Approvals
О
О
О
UL508C 89/336/EEC À CSA 22.2
ОО
ОО
ОО
О
О
О
ОО
ОО
ОО
ОО
ОО
ОО
Designed to meet these standards IEC 146-1-1
FCC Class A À and B À
VDE 0871 À and 0875 À
Control Inputs (Analog Signal Follower only -All Controller Ratings)
External Speed Potentiometer 1K to 10K Ohms, 2 Watts Minimum
Analog Input (4 to 20mA) Input lmpedance 250 Ohms
Analog Input (-10 to +10 V DC) Input Impedance 100 K Ohms
Control Output (All Controller Ratings)
Programmable Output
(Form C Relay contact)
Resistive rating: 0.4A @125V AC, 0.2A @ 230 V AC, 2A @ 30V DC
Inductive rating: 0.2A @ 125V AC, 0.1A @ 230V AC, 1A @30V DC
À With external filters.