Rockwell Automation 1336-GM6 Enhanced DeviceNet Communications Module - Manual (Page 3)

Summary of Changes
Summary of Changes
The information below summarizes the changes made to the company
wide templates since the last release.
Updated Information Changes to the adapter firmware include the following:
Changes to this manual include the following:
Change Description
Additions Added an Allen-Bradley proprietary object used by the PCP
group.
Corrections Corrected known bugs in the firmware.
Location Description
P-3, 7-1, F-1 Attention regarding Explicit messaging was added.
1-4 Information was added in the footnotes.
Chapter 4 Instructions for using DeviceNet Manager were replaced with
instructions for using RSNetWorx for DeviceNet.
Chapter 5 Instructions for using DeviceNet Manager were replaced with
instructions for using RSNetWorx for DeviceNet.
6-2 Data in the I/O image was corrected.
6-4 Information was added about the Logic Command Bits
6-6 A change was made to the data in rung 0010.
6-7 A change was made to the data in rung 0003.
Appendix B Instructions for using DeviceNet Manager were removed.
B-14 Value range for parameter 27 was added.
Description for parameter 31 was corrected.
C-20, C-22, C-23 Service Code for the Set_Attribute_Single was corrected.