Rockwell Automation 1336-GM6 Enhanced DeviceNet Communications Module - Manual (Page 65)

Ladder Logic Programming 6-3
Example Ladder Logic Programs The following are example ladder logic programs for a 1305, 1336
PLUS, or 1336 PLUS II drive.
Important: Refer to the user manual for your SCANport product for
specific I/O definitions. Different SCANport products have different
Logic Command, Logic Status, Reference and Feedback I/O
interpretations.
!
ATTENTION: The example ladder logic program
shown in this manual is intended solely for purpose of
example. Because there are many variables and
requirements associated with any particular installation,
Rockwell Automation does not assume responsibility or
liability (to include intellectual property liability) for
actual use based upon the example shown in this
publication.