Configuring your logix module, Configuring your logix module -13 – Rockwell Automation 1394 SERCOS Interface Multi-Axis Motion Control System User Manual
Page 21
Advertising
Publication 1394-IN024B-EN-P — February 2004
Commissioning Your 1394 SERCOS Interface System
1-13
Configuring Your Logix Module
To configure your Logix module:
1. Right-click on I/O Configuration in the explorer window and
select New Module. The Select Module Type window opens.
2. Select 1756-MxxSE or 1784-PM16SE as appropriate for your
actual hardware configuration.
3. Select OK. The Module Properties wizard opens.
•
Name the module
•
Select the slot where your module resides
•
Select an Electronic Keying option.
4. Select Next until the following screen opens.
Advertising