Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 27)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 27
Installation Chapter 2
Connect Peripherals The following illustration shows the I/O port panel of the computers. Peripheral
components compatible to each port are inside the callout figures.
Figure 10 - 750R and 1450R Computer Peripherals
TIP • There are three USB ports on the front panel. Use these ports to connect
various USB devices to the computer, such as an external drive.
• You can use a DVI-to-VGA adapter to connect an external VGA display to
the DVI-I1 port of the computer.