Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 34)

34 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014
Chapter 3 Operation
Shut Down the Computer Use either of the following methods to shut down the computer.
After you shut down the computer, do not apply power again until shutdown is
complete. For computers with an HDD, the HDD must come to a complete
stop, which can take up to 30 seconds after shutdown is initiated.
Method Actions
Windows OS With an attached mouse, keyboard, and display, do one of the following.
• Press Ctrl+Alt+Delete and click Shut Down.
• From the Start menu, click or choose Shut Down from the pull-down menu.
Power switch Momentarily press the power switch to shut down the computer. See Hardware
Features on page 13 for the power switch location.