Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 33)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 33
Operation Chapter 3
Restart the Computer Use any of the following methods to restart your computer:
• From the Start menu, choose Restart.
• Press Ctrl+Alt+Delete on an attached keyboard and click Restart.
• Press the reset button.
During a restart, the computer does the following:
• Clears the RAM.
• Starts the POST.
• Initializes peripheral devices such as drives and printers.
• Loads the operating system.
Use an external display to view the progress of the POST, the initialization of
accessory devices, and the start-up dialogs for the operating system that is installed.
Restart the Computer with the Reset Button
1. If you have a1450R computer and the front
door is locked, complete the following steps:
a. Unlock the front door with the provided
key.
b. Open the door to access the reset button.
2. Lightly press the tip of a stylus or any other
pointed device to the reset button.
IMPORTANT Press the reset button only if the system locks up or some other anomaly
occurs.
Resetting the 1450R Computer Resetting the 750R Computer