Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 31)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 31
Chapter
3
Operation
Chapter Objectives This chapter provides information on the following topics:
• Operating Guidelines
• Start the Computer
• Restart the Computer
• Shut Down the Computer
Operating Guidelines Follow these operating guidelines for your computer:
• If you use an external display, turn on the display first.
• Always use the proper power down procedures as required by your
operating system, such as the Shut Down command in the Microsoft
Windows operating system.
• After you shut down the computer, do not apply power again until
shutdown is complete.
For computers with an HDD, the HDD must come to a complete stop,
which can take up to 30 seconds after shutdown is initiated.
SHOCK HAZARD: Do not operate the computer with the covers
removed. An electrical shock hazard exists. All covers are required to
maintain EMI shield.