Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 35)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 35
Chapter
4
Component Replacement
Chapter Objectives This chapter provides information on the following topics:
• Accessories and Replacement Parts
• Voltage Precautions
• Electrostatic Discharge Precautions
• Pre-configuration
• Post-configuration
• Required Tools
• Remove the Cover
• Reinstall the Cover
• Drive Precautions
• Replace a Drive
• Replace or Add Memory Modules
• Replace the RTC Battery
• Replace the Power Supply Unit
Accessories and Replacement
Parts You can view a list of accessories and replacement parts at
http://ab.rockwellautomation.com/Computers .
Review the specifications of a new component before you install it to make sure it
is compatible with the computer. Record the model, serial number, and any other
pertinent information of new components for future reference.
Voltage Precautions The computers contain line voltages. Disconnect all power to the computer
before you install or remove components.
IMPORTANT We recommend that you use only Allen-Bradley approved accessories and
replacement parts.
SHOCK HAZARD: Disconnect all power to the computer before you remove
components.
Failure to disconnect power can result in severe electrical shock to an individual or
electrostatic discharge (ESD) damage to the computer and components.