Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 99)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 99
Accessories Installation Appendix B
4. Install the I/O card retention bracket.
a. 750R computers: Slide the I/O card retention bracket to the left to
secure the seating slots (D).
b. Align the I/O card retention bracket with the mounting holes (E).
c. 750R computers: Secure the I/O card retention bracket to the chassis
with the two screws from the factory-installed chassis cross member (F).
1450R computers: Secure the I/O card retention bracket to the chassis
with the four screws from the factory-installed chassis cross member (F).
d. Torque the screws to 0.6 N•m (5.2 lb•in).
5. Reinstall the computer cover as detailed in Reinstall the Cover on page 39 .
6. Follow the steps for Post-configuration on page 37 .
IMPORTANT Verify that each sleeve of the I/O card retention bracket is properly
aligned with its add-in card before you perform step 4a for 750R
computers and step 4c for 1450R computers.
F
F
F
E
F
E
D
750R Computer 1450R Computer