Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 97)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 97
Accessories Installation Appendix B
5. Install the new HDD module to the tray.
a. Install the new HDD module with the PCB-side down.
b. Fasten the tray over the HDD module (E).
c. Secure the tray to the HDD module with the four mounting screws (F).
Torque the screws to 0.59 N•m (5.2 lb•in).
6. Return the HDD assembly into its bay (G).
7. Tighten the two captive thumbscrews of the HDD assembly to secure it to
the computer (H).
8. Follow the steps for Post-configuration on page 37 .
ATTENTION: Mechanical shock can damage an HDD module. Do not
drop or bump the HDD module.
H
G
H
H
G
H
750R Computer 1450R Computer