Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 70)

70 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014
Chapter 5 UEFI Set-up Utility
Boot
Parameter
(1)
(1) See page 54 for an explanation of common buttons near the bottom of screen.
Description
Bootup NumLock State Enables or disables the Num Lock key on boot.
Option: On (default), Off
Quiet Boot Enables or disables Quiet Boot option.
Option: Enabled or Disabled (default)
IMPORTANT: When enabled, this option hides the POST screen messages at
computer startup.
Boot Priority List Change the boot order. By default, these devices are the boot priority:
1. USB key
2. CD-ROM
3. HDD
4. PXE
5. UEFI Shell
6. PCI/PCIe RAID/SCSI/SAS card
Follow instructions in the dialog box to change the boot order, and to enable or
disable options.
USB Boot Priorities
(2)
(2) This data field is visible only when a USB device is connected to the computer during startup.
Change the USB boot order through a dialog box.
Follow instructions to change the boot order, and to enable or disable options.
CD-DVD ROM Boot Priorities
(3)
(3) This data field is visible only on computers with CD-DVD ROM devices.
Change the CD-DVD ROM boot order through a dialog box.
Follow instructions to change the boot order, and to enable or disable options.
Hard-Drive Boot Priorities Change the hard drive boot order through a dialog box.
Follow instructions to change the boot order, and to enable or disable options.