Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 76)

76 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014
Chapter 5 UEFI Set-up Utility
AMI Backup
Follow these steps to back up the system image.
1. Click the AMI Rescue menu to access the AMI Rescue screen.
2. Click AMI Backup.
3. Select the appropriate volume from the list.
‘Recovery’ is the volume name where the default backup of factory images
is stored.
4. Click Next.
5. Enter a name for the back-up volume.
IMPORTANT Computers with the Windows Embedded 8.1 Industry Pro operating
system do not contain a factory image backup in the Recovery partition.
IMPORTANT Any USB mass storage drive or eSATA hard disk drive must be formatted
as FAT32, have a drive label other than ‘Recovery,’ and be non-blank.