Metrohm 877 Titrino plus - Manual (Page 107)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Parameters
877 Titrino plus
￭￭￭￭￭￭￭￭ 97
Input range –20.000 - 20.000
Selection off
Default value off
Buffer 4 pH
See Buffer 3 pH.
Buffer 5 pH
See Buffer 3 pH.
7.3.3 Reports
Menu ▶ Parameters ▶ Reports
The reports that will be printed out automatically in connection with a cal-
ibration are defined under Reports.
Results
The result report contains the specifications for the calibration (slope,
pH(0), etc.).
Selection on | off
Default value off
Parameters
All of the parameters of the current method are printed out with the para-
meter report.
Selection on | off
Default value off
PC/LIMS
The PC/LIMS report is a machine-readable report with all of the data
important for a determination. The PC/LIMS report can be saved as a TXT
file on a USB storage medium or sent via an RS-232 interface to a LIMS.
The output location is defined in the system settings (see "PC/LIMS
report", page 62).
The file name of the TXT file is constructed as follows: PC_LIMS_Report-
ID1-YYYYMMDD-hhmmss.txt.
Selection on | off
Default value off