Metrohm 877 Titrino plus - Manual (Page 35)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
877 Titrino plus
￭￭￭￭￭￭￭￭ 25
2 Select a titration and measuring mode
￭ In the function bar, select New and press [OK].
￭ Select Mode and press [OK].
￭ Select the desired titration mode in the selection list and apply
with [OK].
￭ Select Measured quantity and press [OK].
￭ Select the desired measuring mode in the selection list and apply
with [OK].
￭ Press [BACK].
The method is now loaded and is displayed in the main dialog under
Method.
If a new method has been created, then the individual parameters can be
modified under Menu
▶ Parameters.
5.4.2 Saving a method
If you modify method parameters, then you can save these as your own
method. A maximum of 100 methods can be saved.
To save a method, proceed as follows:
1 Opening the method table
￭ In the main dialog, select Method and press [OK].
The method table opens: