Metrohm 877 Titrino plus - Manual (Page 12)

1.2 About the documentation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 ￭￭￭￭￭￭￭￭
877 Titrino plus
1.1.2 Connectors
The instrument is equipped with the following connectors:
￭ MSB connector (Metrohm Serial Bus)
For connecting a stirrer.
￭ USB (OTG) connector
The 6.2151.100 adapter can be used to connect, for example, a
printer, a USB flash drive or a USB keyboard.
￭ Sensor connectors
Four connectors for the following sensor types:
– pH or redox electrodes
– reference electrodes
– polarizable electrodes
– temperature sensors (Pt1000 or NTC)
￭ Remote connector
For connecting a Dosimat or sample changer. The Dosimat enables
automatic addition of an auxiliary solution.
1.1.3 Intended use
The 877 Titrino plus is designed for usage as a titrator in analytical labora-
tories. Its main application field is volumetric titration.
This instrument is suitable for processing chemicals and flammable sam-
ples. The usage of the 877 Titrino plus therefore requires that the user
have basic knowledge and experience in the handling of toxic and caustic
substances. Knowledge with respect to the application of the fire preven-
tion measures prescribed for laboratories is also mandatory.
1.2 About the documentation
CAUTION
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.2.1 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.