4 methods, 1 creating a new method, Methods – Metrohm 877 Titrino plus User Manual
Page 34: Creating a new method
5.4 Methods
■■■■■■■■■■■■■■■■■■■■■■
24
■■■■■■■■
877 Titrino plus
NOTE
Some templates contain the wildcard Molw, which stands for the
molar mass of the sample. You must replace this wildcard with the cor-
rect value in the calculation formula.
The templates available:
Template
Description
Content %
Content in %
Unit of the sample size = g
Content mmol/L
Content in mmol/L
Unit of the sample size = mL
Content mol/L
Content in mol/L
Unit of the sample size = mL
Content g/L
Content in g/L
Unit of the sample size = mL
Content ppm
Content in ppm
Unit of the sample size = g
Titer
Titer calculation
Unit of the sample size = g
Blank mean value
Blank value as mean value of single results
Blank single value
Blank value as single value
5.4
Methods
5.4.1
Creating a new method
Proceed as follows to create a new method:
1 Open the method table
■
In the main dialog, select Method and press [OK].
The method table opens: