Metrohm 877 Titrino plus - Manual (Page 36)

5.4 Methods
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26 ￭￭￭￭￭￭￭￭
877 Titrino plus
2 Modifying/applying the method name
￭ In the function bar, select Store and press [OK].
A method name will be suggested for new methods. If the
method has already been saved once, then the method name will
be displayed:
Applying the name:
￭ Press [BACK].
The method will be saved and the method table is displayed.
Entering a new name:
￭ Press [OK].
The text editor opens.
￭ Enter a method name (max. 12 characters) and apply with
Accept or [BACK].
￭ Press [BACK].
The method will be saved and the method table is displayed.
5.4.3 Loading a method
To load a method, proceed as follows:
1 Open the method table
￭ In the main dialog, select Method and press [OK].
The method table with the stored methods opens: