Metrohm 877 Titrino plus - Manual (Page 88)

7.1 Monotonic equivalence point titrations (MET)
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
78 ￭￭￭￭￭￭￭￭
877 Titrino plus
The result name is specified in the list for each calculation.
Edit
Edit the data of the selected calculation, see following chapter.
Delete
Delete the selected calculation.
7.1.5.2 Editing a calculation
Result name
The result name is the text which will be shown in the result view and in
the report.
Entry 12 characters
Default value empty
R1=…R5=
Shows the calculation formula. A special editor is opened for the defini-
tion (see Chapter 5.3, page 22).
Entry 44 characters
Default value empty
Decimal places
Number of decimal places used to display the result.
Input range 0 - 5
Default value 2
Result unit
The result unit is displayed and saved together with the result.
Selection % | mol/L | mmol/L | g/L | mg/L | mg/mL | ppm |
g | mg | mL | mg/piece | °C | µL | mL/min | User-
defined
Default value %
User-defined
A user-defined unit can be created. This will be added to the selection
list. The previous entry will be overwritten as soon as the new unit has
been defined. A blank entry can be generated this way as well.
Save as titer
The result can be saved as titer for this selected solution. If statistics has
been switched on, then the current mean value of the determination
series will be saved.
Selection on | off
Default value off