Metrohm 877 Titrino plus - Manual (Page 65)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 System settings
877 Titrino plus
￭￭￭￭￭￭￭￭ 55
6.2 Managing sensors
6.2.1 General
Menu ▶ System ▶ Sensors
Three standard sensors are defined in the sensor list: pH electrode,
Metal electrode and Temperature sensor. These sensors cannot be
deleted or renamed. The sensor list can contain a maximum of 10 sensors.
Every sensor is identified with an unambiguous name. This means that it is
not possible to use the same name twice, e.g. for a pH electrode and for a
metal electrode.
Edit
Edit the data of the selected sensor, see following chapter.
New
Add a new sensor to the list, see following chapter.
The following sensor types can be selected:
￭ pH electrode
￭ Metal electrode
￭ Temperature sensor
￭ Other sensor, e.g. Spectrosense
Delete
Delete the selected sensor from the list.
6.2.2 Editing the sensor data
Name
The designation of the sensor is used for unambiguous identification.
Entry max. 24 characters
Default value empty
Type
The sensor type is displayed.