Metrohm 877 Titrino plus - Manual (Page 124)

11.1 Measuring inputs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
114 ￭￭￭￭￭￭￭￭
877 Titrino plus
11 Technical specifications
11.1 Measuring inputs
The measuring cycle is 100 ms for all measuring modes.
11.1.1 Potentiometry
A high-ohm measuring input (Ind.) for pH and redox electrodes and a
measuring input for separate reference electrodes (Ref.).
Input resistance > 1 · 10 12 Ω
Offset current < 1 · 10 –12 A
Measuring mode
pH
Measuring
range –13 - +20
Resolution 0.001
Measuring
accuracy ±0.003
(±1 digit, without sensor error, under reference conditions)
Measuring mode
U
Measuring
range –1,200 - +1,200 mV
Resolution 0.1 mV
Measuring
accuracy ±0.2 mV
(±1 digit, without sensor error, under reference conditions)
11.1.2 Polarizer
A measuring input (Pol.) for polarizable electrodes.
Measuring mode
Ipol Determination with adjustable polarization current.
Polarization
current –120 - +120 µA (increment: 1 µA)
–125 - –121 µA / +121 - +125 µA: non-guaranteed values, dependent
on reference voltage +2.5 V
Measuring
range –1,200 - +1,200 mV
Resolution 0.1 mV
Measuring
accuracy ±0.2 mV
(±1 digit, without sensor error, under reference conditions)