Metrohm 761 Compact IC - Manual (Page 175)

4.7 Batch reprocessing
761 Compact IC
165
Recalculate only Enable recalculation of chromatograms with
values for Volume , Dilution , Amount and Internal
standard amount entered in the batch reprocess-
ing table.
The recalculation is done automatically if the
Reintegrate and/or Recalculate options are
enabled. If the Recalculate only option is
enabled, the Reintegrate and Recalculate
options are disabled automatically.
Change passport If this option is enabled, those parameters of
the passport which have been changed after
clicking the <Edit passport> button are applied
to all chromatograms.
<Edit passport> Open the Passport window for modification of
the passport parameters.
Only some of the passport parameters can be
modified. The passport parameters Ident ,
Sample Info 1 and Sample Info 2 entered in the
batch reprocessing table are overwritten if
these values are modified in the Passport
window.
Modify chromatogram appearance
If this option is enabled, the chromatogram
Ap-
pearance parameters which have been changed
after clicking the <Edit appearance> button are
applied to all chromatograms.
<Edit appearance>
Open the Appearance window for modification of
the settings for chromatogram axes, labels and
colors.
Make report Print report for all chromatograms using the
current report settings of the selected chroma-
togram in the Use method... field.
<Edit report options>
Open the Report options window for modification
of the report settings.
Send to Autodatabase Send chromatogram data to Autodatabase file
specified in the Autodatabase options window
(see section 4.5.6).
<Edit Autodatabase options>
Open the Autodatabase options window (see
section 4.5.6).