Metrohm 761 Compact IC - Manual (Page 70)

3 Operating tutorial
761 Compact IC
60
This is done by clicking on the chromatogram and moving
the cursor with the aid of the cursor keys <> and < > to
the middle of the peak and reading off the corresponding re-
tention time in the status line. Enter this value (rounded off if
necessary) into the Time column.
The optimized table could, for example, then appear as
follows:
16 Start calibration
⇒ Click the <Concentrations> button in the component window.
⇒ Click on <Add> . The Add level window appears.