Bio-Rad Bio-Plex Pro™ Wash Stations - Manual (Page 22)

Basic Operation and Maintenance
22 Bio-Plex Pro and Bio-Plex Pro II Wash Stations
Plate Washing Programs
Instructions for running the preconfigured wash program are detailed below.
Instructions for setting new Wash, Dispense, and Aspirate modes into a new wash
program, and instrument rinse instructions, are found in the Defining New Programs
section on page 53.
START
< > OK
SSSSSSSSSSSS
+ - OK
RUN1: Program X
< > EXIT OK
PROGRAM
< > OK
Navigate to PROGRAM in the primary
menu and press OK.
Use the keys under the < and > symbols to access the
Program menu if it is not already displayed
Press OK
Select the required program and press
OK to continue
Choose OK.
Rows are represented by S (selected) or
N (not selected). All rows should be
selected.
It is highly recommended that all wells
are selected and the entire plate is
washed.