Bio-Rad Bio-Plex Pro™ Wash Stations - Manual (Page 61)

Defining New Programs
Bio-Plex Pro and Bio-Plex Pro II Wash Stations 61
Clear Program
This submenu is used to clear a program from the instrument's memory.
Confirm that selected program
is to be deleted
CLR (Program Position)?
Select the program to be deleted
from the instrument's memory
(Program Position: Program Name)
The name of the program which
has been deleted appears
(Program Name: DELETED)
CLEAR
< > EXIT OK
CLR PROGR 1?
NO YES
A: DELETED
CLR PROGR 1:A
< > EXIT OK
Press OK to enter the CLEAR
menu.
If the program is locked it cannot be cleared and the following message is displayed:
PROGRAM IS
LOCKED
The program can only be unlocked via the HydroControl software, by users with the
appropriate rights.
Settings Menu
The Settings menu has the following options:
Edit Plates Adjustment procedure for setting the parameters for up to
20 different microplates.
Options The Settings menu contains the following submenus:
Edit LLD Channels, Vacuum Filtration, Process Control.
Bubble
Sensor The Bubble Sensor sensitivity can be set to Low, Medium, or
High depending on liquids used (if this option is installed). If very
foamy liquids are used the bubble sensor should be switched OFF.
The Settings menu has the following structure:
EDIT PLATES
< > EXIT OK
SETTINGS
< > OK
OPTIONS
< > EXIT OK
BUBBLE SENSOR
< > EXIT OK