Replacing the manifold – Bio-Rad Bio-Plex Pro™ Wash Stations User Manual
Page 68
Troubleshooting and Error Messages
68 Bio-Plex Pro and Bio-Plex Pro II Wash Stations
Replacing the Manifold
The Instrument is delivered with the manifold already installed. The manifold drawing
below shows the basic components.
The Rear of the Manifold
Note
Always wear powder-free gloves when handling the manifold.
WARNING
After the instrument has been used, the manifold may be infectious!
Before the manifold is removed it must be thoroughly disinfected.
It is advisable to adhere to applicable safety precautions, (including the
wearing of powder-free gloves, safety glasses, and protective clothing)
to avoid potential infectious disease contamination.
WARNING
Prime the instrument without liquid to empty all liquid from the system,
before removing the manifold.
Dispensing Tubes
Locating Pin
Aspirating Tubes
Locating Pin