Thermcraft XST-3-0-36-3V - Manual (Page 118)

Configuration Installation and Operation Handbook
6-20 2408 and 2404 Controller
Name Description Values Meaning
4A Module 4 configuration
Note: This option is not available on controllers from 01 Jan-04
id Identity of module installed HCS High Current Switch
Func Function nonE Function disabled
dIG Digital output function
HEAt Heating output
COOL Cooling output
VAL.L % PID demand signal giving
minimum output
− ‘Out.L’
VAL.H % PID demand signal giving
maximum output
− ‘Out.H’
Out.L Minimum electrical output
Out.H Maximum electrical output
SEnS Sense of output
(Only if ‘ Func’ = ‘dIG’)
nor Normal (output energises when
TRUE, e.g. program events)
inv Inverted (output de-energises
when TRUE, e.g. alarms)
When ‘ SEnS’ appears, then further parameters are available.
These are identical to those in the ‘ AA ConF’ list on Page 6-14.
Cust 8-point Custom Linearisation
(1)
in 1 Custom input 1
VAL.1 Linearisation Value representing in 1
in 8 Custom input 8
VAL.8 Linearisation Value representing in 8
VAL.L
Out.H Out.L
VAL.H
PID Demand Signal
Electrical
Output
Note:
1. Custom Linearisation is only available when ‘ 3a-Conf’ or iP- ConF list has
‘ inpt’ set to ‘mV.C’, or ‘mA.C’, or ‘V.C’.
2. The values and inputs must be continuously increasing or decreasing
VAL.1
VAL.3
in 8 in 1 in 3
VAL.8
Displayed Value
Electrical
Input