Usable cassettes, Audio mode, When you play back a dual sound track tape – Sony DCR-TRV10 User Manual
Page 109: Sound from speaker, Notes on the mini dv cassette, When affixing a label on the mini dv cassette, After using the mini dv cassette, Cleaning gold-plated connector
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Usable cassettes
Audio mode
12-hit mode: The original sound can he recorded in stereo 1, and the new sound in
stereo 2 in 32 kHz. The balance between stereo 1 and stereo 2 can be adjusted by
selecting AUDIO MIX in the MENU settings during playback. Both sounds can be
played back.
16-bit mode: A new sound cannot be recorded but the original sound can be recordei
high quality. Moreover, it can also play back sound recorded in 32 kHz, 44.1 kHz or -
kHz. When playing back a tape recorded in the 16-bit mode, 16BIT indicator appears
the LCD screen or in the viewfinder.
When you play back a dual sound track tape
when you play back a dual sound track tape recorded in a stereo system, set "HiFi
SOUND" to the desired mode in the MENU settings (p. 72).
Sound from speaker '
HiFi Sound
Playing back
Playing back a dual
Mode
a stereo tape
sound track tape
STEREO
Stereo
Main sound and
sub sound
1
Left sound
Main sound
2
Right sound
Sub sound
You cannot record dual sound programs on your camcorder.
Notes on the mini DV cassette
When affixing a label on the mini DV cassette
Be sure to affix a label only on the locations as illustrated below so as not to cause
malfunction of your camcorder,
[a]
After using the mini DV cassette
Rewind the tape to the beginning, put the cassette in its case, and store it in an uprigh
position.
Cleaning gold-plated connector
If the gold-plated connector of mini DV cassettes is dirty or dusty, you may not opera
the function using cassette memory. Clean up the gold-plated connector with cotton
wool swab, about every 10 times ejection of a cassette,
lb]
[b]
110