Step 1 preparing the power supply, To remove the battery pack, Гг-3'jhl'il – Sony DCR-TRV10 User Manual
Page 9: 0e b
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 1 Preparing the power supply
ГГ-3'jHl'il?!
Install the battery pack to use your camcorder outdoors.
(1)
Lift up the viewfinder.
(2)
Slide the battery pack down until it clicks.
0
e
B.
Э
<Q
§
1
To remove the battery pack
Lift up the viewfinder.
Slide the battery pack out in the direction of the arrow while pressing ВАТТ down.
After installing the battery pack
Do not carry your camcorder by holding the battery pack. If you do so, the battery pack
may slide off your camcorder unintentionally, damaging your camcorder.
|f you use the large capacity battery pack
If you install the NP-FM70/FM90 battery pack on your camcorder, extend its
viewfinder. Take care not to pinch your finger when lifting the viewfinder up and
down.